Can anybody help me? Is your BIOS up to date? Short of that it sounds like it could be the optical drive itself Update you BIOs to whatever version is the latest. Default your BIOs settings and then try it again.
Or use the USB route. I have to agree with Tom. Either a bad drive or perhaps a loose connection with the wires to the drive. Try a different drive, or if unavailable, try connecting to a different power wire, swap data cables, or move the SATA cable to a different spot on the motherboard.
I don't quite understand this statement after reading it again. Have you reset the BIO's and then tried it? If it's working inside the OS but not working outside the OS then there's something weird going on. Just use the USB installer options I mentioned above and be done with it.
Once I try to boot from CD, I can hear the sound of CD spinning, but then after seconds it stops and quickly goes back to reboot. There are some message pops up in between, but I never could read it since it was very quick message and the system would go back to Dell reboot.
I know, for sure, that somehow it used to work, because I got this machine with OpenSuse and it used to be Vista, unless the previous user used other than boot CD method. Well, I do not have the solution for this option, I end up taking the hard drive out and using another computer to upload image on it.
I just had the same problem. The issue is the power supply does not provide enough current to support the boot process from the DVD drive. This worked long enough for me to install the new OS via the boot DVD, and then revert things back to normal. To continue this discussion, please ask a new question. DellFollowers - Follow Mentions Products. Samuel Dell. Get answers from your peers along with millions of IT pros who visit Spiceworks.
Popular Topics in Dell Hardware. Which of the following retains the information it's storing when the system power is turned off? We've had no end of problems with those devices. What's the disc you're trying to boot from? Does it work in other machines? Tom Loveday This person is a verified professional. Verify your account to enable IT peers to see that you are a professional. Lee This person is a verified professional. Homer T. Nacho Cheese This person is a verified professional. Does this problem occur with just this one bootable CD, or all bootable CDs?
Just curious, if someone eve will find a solution to it. Joe Mar 28, at UTC.
Three ways to boot your computer from CD/DVD ROM
Hope this helps This topic has been locked by an administrator and is no longer open for commenting. Read these nextThe client has years of tax software, etc. Then, perform a Windows 10 Upgrade and apply updates. At this point, the old systems should boot to Windows 10 on new SSD's. Then move the new SSD's to the new systems, and boot off of them. Windows 10 does such a good job of re configuring itself, I thought it would handle it fine and then ultimately wind up with new systems with Windows 10 and all apps intact.
At least that was the plan until I tried booting these new SSD's in the new Optiplex's. The old systems were set to legacy mode, not UEFI. I soon discovered that the new 's don't even see anything to boot from. Odd, I thought.
A little research and I found that Dell has removed any ability to boot from a "legacy" formatted internal hard drive in the So, now I need to get creative. If it involves using a different or more SSD's, that is fine. I have plenty of SSD's. Maybe a utility or something to convert? Well I will make things easy grasshopper.
Dell has made their machines slightly more painful due to slight BIOS changes. When you pulled the old drive you pulled the drive with the UEFI settings recorded on it now the system does not know where to look for its boot info.
In my case I was pulling the original drive and would insert the new M. When the install succeeded and went to reboot the system I would get a drive not found message like you.Powerful password recovery software to recover password for Windows Microsoft account, local account, and domain account, without setting computer to factory mode and no data lost.
Easy, safe and efficient data backup solution. Supports almost all Windows systems! When your computer met with some problems, such as you forgot Windows password are locked out of computer, your computer was broken down that can't be boot normally, or you just want to reinstall Windows operating system on your computer with a CD.
On some computers, when you plug in the CD and restart computer, you are prompted to press any key to boot computer from CD. Step2: On the black screen, when you are prompted to press any key to boot computer from CD, press any key on the keyboard. Step5: After setting the boot order, press F10 to save change, and press Enter to exit and boot computer from CD drive.
Step2: When power on, the brand logo appears, press Boot menu key F8, F12, Escor other key immediately and repeatedly until the Boot Menu appears. Windows Password Tuner. Download Buy. Cocosenor Backup Tuner.That's surely not clear in this BIOS. The boot menu looks like this:. Press any key to reboot the system. Others do boot and seem to work fine but, I believe, only Linux-based actually work. They either hang at "Starting Windows" or at "loading initrd".
It almost appears that there is something like Secure Boot not being fully disabled. A BIOS bug? And others that have signature in bios.
I too am a user.
How Do I Boot from CD/DVD/USB in Windows 8 & 10?
Dare I ask: The response sounds pretty definite! So, perhaps you can let us know "Why is this? GPT only aka 64 bit booting. No more bypass of signature for drivers and option roms. Earlier Browse Community. Turn on suggestions. Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. Showing results for. Search instead for. Did you mean:. New Precision won't boot from CD.
Windows-based CDs "hang" in the middle of booting from a live CD. What's going on? I need to boot from CD from time to time. Safe boot is disabled. Legacy boot is enabled. All forum topics Previous Topic Next Topic. Hi fred, Thank you for writing to Dell Community Forum. Only 64 bit versions of windows will boot. Dell Support Resources.Created the disk. What are the steps to change the boot priority temporarily? It used to easy with MBR file system.
If there is set PC to legacy mode, and then you should find options to set boot priority e. You should be able to boot in then from DVD. Hopwever, there is a bug in latest version of software that does not allow GPT formatted disks to be seen when using DVD. Either use previous version of TI you can download from your accountor contact acronis for an updated iso that for most users solves the problem. Thus, the Rescue Disk may not be seen by the Dell only because of how it was built?
Also, are you saying if I needed to run Acronis from the CD. No idea what if that happened? Please view the images of screens I've captured. Perhaps one of you can tell me what to change? Search forum for workarounds easiest is to load previous version from you account. Above is annoying but works ok in most cases where you cant boot to EUFI mode directly with rescue disk.
Also, you should not need to burn iso to disk download imgburn freeware dos this great if you have already created recovery disk from TI. Can't tell you too much about BIOS screens expect yous look like you support legacy mode. I will share that here. Spent many hours with them, really! Still I had to wing it but got there. While I will explain it below, there is a problem that is now in the Acronis Ballpark. I will include an iphone picture of what I am seeing.
I need Acronis to tell me why this is happening.
Subscribe to RSS
Again, disk boots and screen can not be read. See attached images describing each step below showing the messed up useless Rescue Disk Main Menu screen. When you see the Dell logo center of screen, press "F2" continually to enter the Setup Menu. See attached file 1. See attached file 2. Acronis Rescue Disk boots to its Load Menu. Select True Image. See attached file 4. See attached file 5. There is an apparent video incompatibility that I need Acronis to observe and resolve for me and probably for others with similar systems.
Ask Ubuntu is a question and answer site for Ubuntu users and developers. It only takes a minute to sign up. I want to dual boot ubuntu From what I've been researching, in order for ubtuntu to be dualbooted with windows 10 on a uefi machine, the ubuntu installation media in this case a usb must also be booted from uefi as opposed to changing the boot setting to Legacy and booting from usb that wayso that the correct grub-efi, instead of grub-pc, is installed.
I have a Dell Inspiron series with core i7 processor its 64bit and also boots windows with uefi. The problem is, when I try to install ubuntu this way, after rebooting, my system boots directly to windows 10 and the grub option does not even appear, let alone the actual bootloader screen to select which OS I want to boot.
I assume my problem is that I can not install ubuntu correctly since I have to boot the usb in legacy mode when trying to install. Also, the filesystem on the usb appears as FAT32 which should be recognizable to windows to support usb uefi booting. Can anyone help me with a workaround or anything? Now the most important operation The pc will now restart, when the Dell logo is coming, press F12 again, till the boot menu appears.
You don't say what tool you used to create your USB drive. This is a critical detail because not all boot programs are created equal. Rufus and Unetbootin usually work well for creating EFI-bootable media, but this varies somewhat from one computer to another, so even if you used one of those you might try something else.
This will require that Secure Boot be disabled, but once rEFInd is up and running, it should enable you to boot Ubuntu. Ubuntu Community Ask! Sign up to join this community.
The best answers are voted up and rise to the top. Home Questions Tags Users Unanswered. Asked 4 years, 2 months ago. Active 1 year ago. Viewed k times.I've recently purchased some new Dell Optiplex 's.
This is the first time I've gotten this model, so I went through the standard procedure of downloading the latest WinPE and Win10 driver packs from Dell's website and imported them to my MDT server. If I try to deploy my image now, it will fail almost immediately after picking the task sequence due to not detecting appropriate storage drivers.
Has anyone else run in to this? It's not a big deal to make the setting change and it doesn't affect the performance of the m. I do this to all of my machines. Good call. That seems to have fixed the problem!
I'm facing the same behavior with my freshly received OptiPlex Finally did you manage to get the job done with MDT?
Yes, I'm using the total control driver management method for injecting drivers. Versions are as follow: MDT 6. Should have missed something Sounds like the storage drivers might be the issue in particular if it's trying to image the computer but fails to Dell SupportAssist. I am having the same problem. Optiplex We just ordered of these models.
Just to clarify, you are able to network boot in to MDT and select your task sequence, but it fails at that point? I recently just received a Dell Optiplex to also image.
I used this instead of WDS. You may get a better answer to your question by starting a new discussion. DellFollowers - Follow Mentions Products. Samuel Dell. Get answers from your peers along with millions of IT pros who visit Spiceworks. Best Answer.
Pure Capsaicin. Verify your account to enable IT peers to see that you are a professional. Lincoln44 wrote: I've recently purchased some new Dell Optiplex 's. Popular Topics in Dell Hardware.